GAME Der Lenkrad-Thread

[rockanimal CH]

Also wenn ich auf deinen facebook link klicke aufm handy steht folgendes bei mir:

Kann es sein dass die uhrzeit bei deinem computer falsch eingestellt ist? Denn bei mir kam jedes bild zwischen ca zwischen 08.00 und 11.00 uhr. Und zwar JEDEN Tag. Ansonsten auch egal

 

[m1ke82]

Der Start des Countdowns war am 19. August.

Facebook Fanatec

Da ist der ganze Verlauf zu sehen.

Richtig, beginnend am 20.August
Warum da bei dir 19. August steht, keine Ahnung.

pro Tag 1 Bild = Countdown

 

[XettMan]

Zicke braucht ganz einfach Urlaub.

 

[Zimtzicke]

Spooky!

 

[rockanimal CH]

Du bist sicher einer der Auserwählten

Aber sieht irgendwie nach amerikanischer Zeitzone aus, aber ich seh auf deinem Screenshot ja dass die Zeit stimmt

 

[m1ke82]

Zimti is der Auserwählte..das muss es sein. Nur das macht Sinn

 

[Zimtzicke]

Ich weiss echt nicht, woran es liegt?

Egal, dann eben morgen.

 

[XettMan]

Zimti, 9h zurück = Pacific time

Zimti, der Auserwählte.

 

[rockanimal CH]

Zimti kann sicher schon ab 00.00 auf den Bestell Button klicken und wir erst 08.00

Spass beiseite, ich freu mich auf morgen

 

[XettMan]

Zimti ist wohl ziemlich heiss auf ein PS4 kompatibles Fanatec Wheel.
Zimti sollte endlich zum PC wechseln, dort hat er die Qual der Wahl und kann sich aus einem reichhaltigen Portfolio bedienen. Rennsims auf dem PC, alles andere kann er ja weiterhin an der PS4 zocken.
Morgen früh wissen wir dann ja was Sache ist.

Wenn @Zimtzicke letzte Woche indies Rig hätte testen können, wäre er bei Rennsims wahrscheinlich auf den PC gewechselt und müsste jetzt nicht hoffen, dass Sony / Logitech endlich in die Puschen kommt bzgl. Kompatibilität.

 

[rockanimal CH]

Gerade eben ne E-Mail von Fanatec erhalten:

Sehr geehrter Kunde,

Sie haben die Fanatec ClubSport Wheel Base vorbestellt. Leider ist dieses Produkt nicht mehr verfügbar. Wir können Ihnen jedoch ein kostenloses Upgrade auf die neue ClubSport Wheel Base V2 mit einem brushless Servo Motor anbieten. Selbstverständlich können Sie ihre Vorbestellung auch zu jedem Zeitpunkt stornieren.

Falls wir nichts mehr von Ihnen hören, werden wir ihre Bestellung umwandeln und die V2 Version liefern (Die Lieferung ist geplant für Ende September).

Eine Invitation ist ebenfalls nicht nötig.

Mit freundlichen Grüßen / Best regards
Fanatec_Gameshop

ich freu mich grad abartig!!!

 

[indierocker]

Jackpot! Gratuliere!

 

[rockanimal CH]

danke. Als die den Countdown gestartet haben dachte ich noch ich sei sooooo ein Trottel nicht noch kurz gewartet zu haben
und jetzt

 

[XettMan]

CSW v2 für 449€.
Und wer hatte dir geraten, vorzubestellen?

 

[MouseMan]

Die Fanatec-Homepage leidet wohl momentan unter einem Ansturm
Sie ist momentan nicht erreichbar für mich, zumindest nicht die mitteleuropäische Region.

Edit: Kaum schreib ich gehts wieder

 

[rockanimal CH]

CSW v2 für 449€.
Und wer hatte dir geraten, vorzubestellen?

dafür bin ich auch sehr dankbar im nachhinein!

Die Fanatec-Homepage leidet wohl momentan unter einem Ansturm
Sie ist momentan nicht erreichbar für mich, zumindest nicht die mitteleuropäische Region.

Edit: Kaum schreib ich gehts wieder

Thomas (Fanatec) hat im virtual racing Forum geschrieben dass sie aufgrund eines Hacker Angriffs Probleme mit der Page hätten...

 

[rockanimal CH]

Schade funktioniert die Seite immer noch nicht. Möchte wissen ob die Base jetzt Xbox One kompatibel ist

 

[LAEMMLI]

Schade funktioniert die Seite immer noch nicht. Möchte wissen ob die Base jetzt Xbox One kompatibel ist

Nee, ich war heute morgen drauf! Nur PS3 und PC, bei Xbox 360 war ein rotes kreuz, also nicht kompatibel.

Ich nehme an es ist genau wie die V1 Base kompatibel.

 

[Zimtzicke]

Also auch nicht PS4...

Tja, dann wird es das T500rs.

 

[rockanimal CH]

The ClubSport Wheel Base V2 - Servo Power and multi platform

• The day has come and I am proud to show you the brand new ClubSport Wheel Base V2.
  
  
  
  This image has been resized to fit in the page. Click to enlarge.
  
  
  
  Although it looks familiar to you it has almost no part which has not been modified or replaced to make it a better base.
  
  Our
  focus was durability, durability, durability and then performance. And
  while we made a radical re-design, we decided to make an offer nobody
  can refuse.
  
  The smoothness, vividness and precision of a Direct Drive wheel combined with a torque increase of
  about 75% and (optional) compatibility to the latest gaming
  consoles. And all that with a moderate price increase.
  
  
  
  Here are the details:
  
  7 Ultra Precise
  We
  replaced the optical sensor with two magnetic high resolution hall
  sensors mounted on both the motor and the steering axis. The new sensors have double
  the resolution and the magnetic sensore are less vulnerable to dust or scratched
  code discs.
  
  
  6 Smoothastic
  The cogging of this system
  cannot be felt by a human anymore. It is incredible smooth and feels
  natural and realistic. It is on par or better with the best and most
  expensive wheel out there although those wheels costs a multiple of the
  CSW B V2.
  Every little bump can be felt and effects which were
  filtered by the wheel mechanics can now be felt. Your racing simulations
  will feel different and new to you.
  
  
  5 Rock Solid
  Our focus was to achieve high durability even for hardcore users.
  • Improved QR release with rubber o-ring and less tolerance in production
  • A brushless motor which can be cooled much easier as it gets hot on the outside and not on the inside so heat can be transfered better
  • New cooling system featuring an additional fan on the backside right behind the new huge heat sink
  • Integrated heat sensor inside the motor
  •
  Motor can now even be operated at 180 C° although the FOR overclocking would be de-activated already at 120 C° and FF would shut down at 130°C.
  The motor has plenty of power so most people will not use max settings
  anyway. And during betatests it never happened that a motor was shut down or the FF was cut due to overheating.
  • Ball bearings on the motor axis and bigger ball bearings
  inside the pulleys so we can increase the belt tension and avoid any belt
  slip. At the same time we have much less drag in the system.
  • Magnetic sensors instead of the optical so we avoid problems with dust and scratches
  • New main cable
  • New electronics
  • And many other small improvements to the overall build quality
  
  
  
  4 Power. A lot.
  The
  new motor is custom designed and exclusive to Fanatec. Although the
  gear ratio has been changed to increase the rotation speed, it delivers
  about 75% more torque than the CSW B V1. This means over 7 NM of sheer
  power and this is enough to use even heavy rims with no disadvantages.
  The size of the power supply has also increased in order to feed the big motor.
  
  
  3 Brushless Servo
  A
  brushless servo motor is currently state-of-the-art for force feedback
  systems and in principle this is exactly the same motor as the most
  expensive direct drive base units out there.
  • Smooth performance with no cogging (in combination with our Poly-V belt drive system or direct drive)
  • Easier to cool as the heat is on the outside of the motor and not on the motor shaft
  • Strong axis with ball bearings
  • Optimized for use in stall at max power
  • Fast acceleration
  • More efficiency -> more torque with same power
  
  We
  had to develop entire new electronics for that motor as the motor
  driver is quite complex. Now that it is done we can easily use it for
  smaller brushless motors or a direct drive wheel.
  
  
  2 Next Generation
  The ClubSport Wheel Base V2 is the next generation of ourwheel base but there is also a strong demand of wheels for “Next-Gen” consoles. People
  were asking us to make their wheels compatible to the Xbox One and
  Playstation 4 but if we want to make it official and legal then we need
  to follow the rules of the console makers and they clearly do not allow
  that.
  So how can we make a product where there is a chance that the
  customer can keep at least most of the equipment he purchased? We can
  easily make the pedals, shifters and handbrake compatible and this is
  what we did but what about the base unit?
  And how can we make a
  product multi-platform compatible if we can only get approval for a
  license if the product has only the symbols of either one console on it?
  We
  came up with an idea which brings modularity to a whole new level and
  protects your investment. If you play on PC then just go ahead and
  purchase the wheel base as it is and you will not be bothered with
  symbols which might hurt your eye.
  But if you want to enjoy the painless
  simplicity of a console with its great exclusive racing simulations then
  you will get the option to buy an optional steering wheel which will
  add full console compatibility to this base.
  
  We want to achieve
  compatibility to both Xbox One and PlayStation 4 and we are happy to
  announce that we already signed a contract with one of them. We will
  announce this product at the end of this year.
  There will be multiple
  steering wheels available in different price ranges and they will
  compatible to several Fanatec base units from mid-range to direct drive.
  
  
  
  1 By Invitation Only
  The
  great response we get from our beta testers lead us to the conclusion
  that the demand for this product will be much bigger than the supply. Production output will be lower as before as we spend even more time on quality control and testing.
  At
  the same time we want to honor the loyalty of our existing customers
  and want to offer a special pre-order discount for the owners of the
  current ClubSport and CSR Elite base so that they can enjoy a little
  upgrade advantage.
  This is how it works:
  • We will send an e-mail to our webshop customers with an invite code. There will be several waves of e-mails in the next months.
  • Only after you entered the code to your profile page you will be able to purchase or pre-order this product
  • After you purchased one V2 base you will receive a second code. You can give that to a friend or buy a second base.
  •
  Only one code will be given with a purchase as we want to avoid that
  people are selling their products or invites on eBay and make money with
  it.
  • We will also give away invites in giveaway events so
  frequent followers of the blog or Facebook will also get a chance to get
  an invite
  
  This is the priority we will use for the invites to make it as fair and transparent as possible.
  1. Webshop customers of the CSW B V1 and CSR E (sorted by purchase date)
  2. Webshop customers of other ClubSport products like CSP or CSS
  3. All other Fanatec customers
  
  Of course we will treat all territories with the same priority.
  
  Not
  every customer will use his invite so go ahead and ask your friends if
  they use their invite of if they give it to you in case you are not on
  the list yet. It is possible and welcome to transfer invite codes.
  
  Please
  do not ask our sales team for invites. They are not authorized to give
  out codes anyway. If it is your turn then you will get an e-mail. We
  will open a thread in our forum which explains more details and where
  you can also ask for invites from other members.
  
  By the way, all
  lucky customers who placed a pre-order for the old V1 base just got a
  free upgrade to V2 and they are the first to receive the new product.
  
  
  
  The Price
  
  Pre-order price:
  EU: 499,95
  USA: 499,95AUS: 655
  J: 65.000
  
  Regular price:
  EU: 599,95
  USA: 599,95
  AUS: 785
  J: 78.000
  
  Prices are calculated different in the regions depending on taxes, laws, logistic costs and other local costs.
  
  Availability
  
  We
  started production this week and as soon as we start shipping, we will
  open the pre-orders for the invited guests. The first products should
  arrive at the end of September or early October.